Topoint Starting 36 Compound Bow قوس مركب ( كمباوند )
هذا القوس يتطلب معرفة وخبرة في طريقة تجهيزه وإستخدامه
عدم وجود الخبرة والمعرفة قد يؤدي لإصابة المستخدم أو تلف للقوس
- Draw length: 20-31 inches طول السحب
- Draw weight: 19-50 LBS قوة السحب
- Axle-to-axle: 36 inches الطول
- Brace height: 7 inch ارتفاع الجسر
- Module: Rotating mod نوع البكرة
- Only Right-handed الاتجاه: ايمن
DRAW WEIGHT ADJUSTABILITY
You have the choice of draw weight from 19-50lbs.Draw weightadjustments can be made by turning the limb bolt counter -clockwiseusing an Allen key.lt is important to adjust both limb bolts in equal amounts.
Do not exceed the recommended turns out from the maximum drawweight. Maximum opening:7complete turns starting from closed position.
To adjust draw length,remove the draw length screw from themodule and rotate the draw module to the desired draw length hole.Reinsert the draw length screw,snug the screw into position andretighten (do not over tighten).Repeat this process on the second cammaking sure both modules are set in the same draw length position.
# bow # compound # PSE # كمباوند # كومباوند # مركب
- Gallery
- Description
Topoint Starting 36 Compound Bow قوس مركب ( كمباوند )
هذا القوس يتطلب معرفة وخبرة في طريقة تجهيزه وإستخدامه
عدم وجود الخبرة والمعرفة قد يؤدي لإصابة المستخدم أو تلف للقوس
- Draw length: 20-31 inches طول السحب
- Draw weight: 19-50 LBS قوة السحب
- Axle-to-axle: 36 inches الطول
- Brace height: 7 inch ارتفاع الجسر
- Module: Rotating mod نوع البكرة
- Only Right-handed الاتجاه: ايمن
DRAW WEIGHT ADJUSTABILITY
You have the choice of draw weight from 19-50lbs.Draw weightadjustments can be made by turning the limb bolt counter -clockwiseusing an Allen key.lt is important to adjust both limb bolts in equal amounts.
Do not exceed the recommended turns out from the maximum drawweight. Maximum opening:7complete turns starting from closed position.
To adjust draw length,remove the draw length screw from themodule and rotate the draw module to the desired draw length hole.Reinsert the draw length screw,snug the screw into position andretighten (do not over tighten).Repeat this process on the second cammaking sure both modules are set in the same draw length position.
# bow # compound # PSE # كمباوند # كومباوند # مركب